NOTIME Double Ice Sense Home Hair Removal Device

Notime intense pulsed light
Comfortable hair removal
Intense pulsed light therapy device

Five reasons to choose us
1 Medical equipment qualification
Reliable quality, buy with confidence
2 590nm red light wave
Intense pulsed light penetrates deep into hair follicles
3 Ergonomic design”
Light and easy to hold, suitable for lazy people
4 Smart and convenient hair removal
Single shot/continuous light
5 Authenticity Guarantee
Service guarantee

Intense pulsed light acts on hair follicles
Easily remove hair and reduce hair
1 normal hair growth phase
2. Intense pulsed light irradiates hair follicles
3. Melanin in hair follicles absorbs light energy to produce photothermal effect.
4. The increase in hair follicle temperature causes hair follicles to shrink.
5. The vitality of hair follicles decreases and the hair gradually decreases.

11mm light outlet design
No need to replace the bald head
Smooth use in multiple parts

Automatic hair removal for convenient hair removal
Single shot/continuous shot dual mode

lips

finger

armpit

calf

The body weighs only 245g
Thin design suitable for lazy people to remove hair

Step1
shave
Wet shave (do not dry shave)

Step2
Power on
Long press the power button to turn on the phone

Step3
Wear goggles
Please wear goggles to protect your eyes during operation

Step4
Start hair removal
The light outlet is vertically close to the skin, and the crescent light is always on. Short press the flash button to emit light. (After hair removal, you can use cold compress mode to calm your skin)

Note: ① Single shot mode means pressing the flash button once to emit light once. Burst mode is to press the flash button once and then emit light continuously.
② It cannot be used on areas with moles, tattoos or other pigmentation on the skin. Please avoid it when using it.

product description
Product name Intense pulsed light therapy device
Ambient temperature 0℃~30℃
Power supply specification DC12V4A
Strength level 5

Q&A
Q Is it necessary to shave before hair removal?
A If your hair is longer than 1mm, it is recommended that you try using a razor to remove the hair first. Excessively long hair will also absorb heat on the skin surface, causing skin redness and swelling. The burned hair will splash onto the light outlet and produce odor, which will affect your experience of using the product.
Note: Dry shaving is prohibited! Because the razor is sharp, shaving must be done while taking a shower, or with foam or shower gel.
Q The product does not emit light?
A If the skin of the hair removal area is not dry and clean, it will affect the use effect, and may also cause the product to not shine or shine unexpectedly. Do not use this product near bathtubs, shower trays, washbasins or other vessels filled with water. After ensuring that the hair removal area is dry, please place the light outlet of the main unit close to the skin, wait until the crescent indicator light turns green, and then press the flash button.
Q Is there still sound after the product is turned off?
A After shutting down, due to the high internal temperature, the cooling system will continue to work for 2 minutes. This is a normal phenomenon. Please wait for the cooling system to stop working before unplugging the power.
Q Does the hair removal area turn slightly red?
A Slight redness is normal and harmless to the body and will subside soon. The ice compress function can be turned on to relieve skin discomfort.
QWhat kind of care is needed after hair removal?
Avoid contact with water within 6 hours. If your skin feels hot and dry, you can apply moisturizing products to soothe it; avoid exposure to the sun within 24 hours and use sun protection.

Product care and maintenance
Machine daily maintenance
In order to ensure the best results and longest service life of the product, please clean the product before and after each hair removal to avoid long-term accumulation of hair deposits and dust. If you do not clean it properly, the product will not get its due effect. Effect,
Inspect the product, especially the light-transmitting windows and body parts, to make sure they are clean and tidy.
Never wash this product and its accessories under the tap or in the dishwasher.
Do not use steel wool, abrasive cleaners (toothpaste, etc.) or corrosive liquids (gasoline, oil, acetone, etc.) to clean the product.
NOTE: If the light-transmitting window can no longer be cleaned, stop using this product.

Cleaning and disinfection
Turn off the machine, unplug it and let it cool down. The flash window will get hot when using this product.
Make sure it cools down before cleaning/disinfecting.
Cleaning: Use a rag soaked in water or neutral detergent to wipe the surface of the device after it is fully dry, and then wipe it dry with a dry soft cloth.
Disinfection: Use cotton dipped in 70% to 75% medical alcohol to wipe the surface of the equipment for disinfection, and then wipe it dry with a dry soft cloth.
Note: Be especially careful when wiping when cleaning or disinfecting to ensure that no moisture can enter between the internal components of the device.

Precautions
Do not use this product if you are pregnant, lactating, menstruating, have scars on your body, have diabetes, have fragile skin, or have skin sensitive to light.
It is prohibited for those with severe heart disease, severe hypertension, malignant tumors, folliculitis, infectious skin diseases, burned skin, and anticoagulant disorders.
Do not use if you suffer from abnormalities in collagen metabolism, including scarring and poor wound healing.
People with vascular diseases, such as varicose veins and dilated blood vessels at the irradiated site, should not use it.
Do not use if your skin is sensitive to light, prone to rashes or allergies.
Do not use if there is infection, simple cell rash, skin lesions, hematoma, etc. at the irradiated site.
Do not use if you have diseases that suppress immune response (including HIV/AIDS infection, lupus erythematosus, etc.).
It is contraindicated in patients with any bleeding disorder, and it is contraindicated in those who use topical isotretinoin, fruit acid (AHA), salicylic acid (BHA) or azalea acid.
Please use caution if you have used chemical hair removal within 30 days, have used whitening products in the short term, or have used cosmetics containing vitamin A.
Cannot be used at the same time as essential oil products.
The use of aspirin, immunosuppressants, isotretinoin and other drugs is prohibited. It is not recommended for those who have recently used light-sensitive drugs (such as tetracycline, sulfa, etc.).
For minor injuries (sunburn), please wait until the skin is repaired before use. Do not use on sensitive areas such as mucous membranes.
It is strictly prohibited to use this product on any unhealed wounds and is not recommended for patients with hirsutism and other hirsutism conditions.
If you take painkillers, they can make your skin less sensitive to heat. It is recommended to use with caution until the effects of the drug are relieved.
Do not use this product if your skin tone or hair color is not suitable for you.
Do not use on the face, head, ears, neck, nipples, genitals, aorta, inside the belly button, or around the anus. Use in these areas may cause skin swelling, blistering, or temporary skin discoloration and skin blanching.
Do not use if the skin in the area to be removed has tattoos, dark brown or black spots (such as dark freckles, birthmarks, moles or warts). (If necessary, please consult your doctor before use)
Do not use this product around the eyes to avoid eye damage. Protective glasses can indeed protect the user during normal operations, but if you operate at close range around the eyes, the protective glasses may not be able to completely block energy from being absorbed by the melanin in the iris of your eyes. , please wear protective glasses before use. Although the light will not directly affect your eyes, the high-frequency flashing light may affect your vision.
Please set the energy intensity according to your own skin condition. When using it for the first time, be sure to start from level 1.
Do not use antiperspirant immediately after treating your armpits.
Please clean the foreign matter and dirt on the light outlet regularly to avoid product failure and damage to the light outlet.
Do not use it with the ventilation holes blocked to avoid product failure and fire.
Do not irradiate clothes, hair and other items to avoid scorching, discoloration, and damage.
Do not use on pets to avoid harm.
Please wipe off the hair and skin care products attached to the hair removal device before and after use to avoid product failure and skin damage during secondary use. Please keep this product and power supply dry.
The difference in operating environment temperature reaches more than 20°C (from low temperature environment to high temperature environment, or vice versa)
Please shut down the instrument and let it sit for about 2 hours before using it again.
Do not use it near flammable and explosive materials (including sprayers, gas stations, etc.), which may cause fire, electric shock, injury and other dangers.
The operating environment temperature of this hair removal device is 0℃-30℃. Please confirm the room temperature before use.
If the product is damaged, stop using it first and do not touch any internal parts to avoid electric shock.